[1] |
Yao J, Jiao Z, Han S.Friction compensation for low velocity control of hydraulic flight motion simulator:a simple adaptive robust approach[J].Chinese Journal of Aeronautics, 2013, 26(3): 814-822
|
[2] |
Bhaumik S, Kumaraswamy A, Guruprasad S.Design & development of test rig for investigation of contact mechanics phenomena in reciprocating hydraulic seals[J].Procedia Engineering, 2013, 64:835-843
|
[3] |
Liyanage M H, Krouglicof N, Gosine R.Design and control of a high performance SCARA type robotic arm with rotary hydraulic actuators[C]//Canadian Conference on Electrical and Computer Engineering.Piscataway, NJ:IEEE, 2009:827-832
|
[4] |
万保中, 姜继海, 闫伟鹏, 等.电液伺服摆动马达动密封摩擦磨损试验研究[J].机床与液压, 2013, 41(21):8-11, 43 Wan Baozhong, Jiang Jihai, Yan Weipeng, et al.Friction wear experimental research on dynamic seal of electro-hydraulic servo swing motor[J].Machine Tool & Hydraulics, 2013, 41(21):8-11, 43(in Chinese)
|
[5] |
金忠, 张将.摆动液压缸组合密封的建模与计算[J].液压与气动, 2007(10):18-21 Jin Zhong, Zhang Jiang.Modeling and calculat ing of composite seals for rotary vane actuator[J].Technology of Hydraulic and Pneumatic, 2007(10):18-21(in Chinese)
|
[6] |
White C, Denny D, Britain G.The sealing mechanism of flexible packings[M].London:HM Stationery Office, 1948:35-62
|
[7] |
Denny D F.The influence of load and surface roughness on the friction of rubber-like materials[J].Proceedings of the Physical Society, Section B, 1953, 66(9):721-727
|
[8] |
Denny D F.Time effects in the static friction of lubricated rubber[J].Wear, 1959, 2(4):264-272
|
[9] |
Hooke C, O′Donoghue J.Elastohydrodynamic lubrication of soft, highly deformed contacts[J].Journal of Mechanical Engineering Science, 1972, 14(1):34-48
|
[10] |
Hirano F, Kaneta M.Theoretical investigation of friction and sealing characteristics of flexible seals for reciprocating motion[C]//Proceedings of the 5th International Conference on Fluid sealing, 1971:17-32
|
[11] |
Fazekas G A.On reciprocating toroidal seals[J].Journal of Engineering for Industry, 1976, 98(3):783-787
|
[12] |
Nikas G K.Elastohydrodynamics and mechanics of rectangular elastomeric seals for reciprocating piston rods[J].Journal of Tribology, 2003, 125(1):60-69
|
[13] |
Nikas G K.Theoretical study of solid back-up rings for elastomeric seals in hydraulic actuators[J].Tribology International, 2004, 37(9):689-699
|
[14] |
Nikas G K, Sayles R S.Computational model of tandem rectangular elastomeric seals for reciprocating motion[J].Tribology International, 2006, 39(7):622-634
|
[15] |
Nikas G K, Sayles R S.Modelling and optimization of composite rectangular reciprocating seals[J].Proceedings of the Institution of Mechanical Engineers, Part J:Journal of Engineering Tribology, 2006, 220(4):395-412
|
[16] |
张付英, 刘卉, 张林静.液压往复密封理论, 技术与应用的进展研究[J].润滑与密封, 2007, 32(3):194-201 Zhang Fuying, Liu Hui, Zhang Linjing.The evolution study of theories——technologies and application of hydraulic reciprocating seal[J].Lubrication Engineering, 2007, 32(3):194-201(in Chinese)
|
[17] |
郑辉, 张付英.液压往复密封泄漏量的有限元分析[J].机床与液压, 2011, 39(8):58-61 Zheng Hui, Zhang Fuying.Finite element analysis of leakage for hydraulic reciprocating seal[J].Machine Tool & Hydraulics, 2011, 39(8):58-61(in Chinese)
|
[18] |
李树立, 焦宗夏.叶片式摆动液压马达泄漏计算与控制[J].液压与气动, 2005(11):67-68 Li Shuli, Jiao Zongxia.Leakage calculation and control of vane hydraulic swing motor[J].Technology of Hydraulic and Pneumatic, 2005(11):67-68(in Chinese)
|
[19] |
崔晓, 董彦良, 赵克定.基于 ADINA 的组合式动密封泄漏量与摩擦力计算术[J].华南理工大学学报:自然科学版, 2010, 38(2):95-100 Cui Xiao, Dong Yanliang, Zhao Keding.Calculation of leakage and friction of combined dynamic seals based on ADINA[J].Journal of South China University of Technology:Natural Science Edition, 2010, 38(2):95-100(in Chinese)
|
[20] |
Nikas G K, Burridge G, Sayles R S.Modelling and optimization of rotary vane seals[J].Proceedings of the Institution of Mechanical Engineers, Part J:Journal of Engineering Tribology, 2007, 221(6):699-715
|
[21] |
Karaszkiewicz A.Geometry and contact pressure of an O-ring mounted in a seal groove[J].Industrial & Engineering Chemistry Research, 1990, 29(10):2134-2137
|
[22] |
温诗铸, 黄平.摩擦学原理[M].北京:清华大学出版社, 2002:86-121 Wen Shizhu, Huang Ping.Tribological principle[M].Beijing:Tsinghua University Press, 2002:86-121(in Chinese)
|
[23] |
顾永泉.流体动密封[M].北京:中国石化出版社, 1992: 112-156 Gu Yongquan.Fluid seals technology[M].Beijing:China Petrochemical Press, 1992:112-156(in Chinese)
|
[24] |
MÜller H K, Nau B S.Fluid sealing technology:principles and applictions[M].Boca Raton:CRC Press, 1998:54-81
|