Geometrical characteristics of structural model for 3-D braided composites
-
摘要: 建立合理的三维编织复合材料结构模型,对其力学性能的有限元计算结果具有重要影响.以成型后的三维四向编织复合材料为研究对象,在实验观察和以往研究的基础上,提出了一个新的有限元胞体结构模型,该模型正确地反映了纤维束的交织方式,更符合三维四向编织复合材料的实际细观结构.基于该单元模型推导了编织参数与结构模型参数之间的几何关系,计算了胞体中纤维体积比并讨论了其几何特性.研究结果表明:当纤维束中的纤维丝根数和纤维束半径,以及纤维体积含量一定时,编织物的花节长度和厚度随着纤维编织角的增大而分别减小和增大,三维四向编织复合材料结构的纤维体积比理论上可以达到68%.Abstract: It has significant effects on the FEA(finite element analysis) results of the mechanical properties of braided composite to set up a reasonable structural model of 3-D(three-dimension)braided composite. The braided composite after molding was taken as a study object. According to the experimental result and former research, a new model of representative volume elements for FEA of braided composite was proposed. The new model truly reflected the braided manner, coinciding with the actual configuration of the 3-D and four-direction braided composites. On the basis of the new model, the relationship between the braiding parameter and the parameters of unit model was derived and the volume fraction of fibers in this representative volume element was calculated. By studying the geometrical characteristics of the braided composite, it indicates that if the volume fraction of yarn, the radius of yarn bundle and the number of yarns in a yarn bundle are invariable, the pitch length and thickness of composites will increase and decrease respectively with the increase of braiding angle, and the volume fraction can reach as much as 68% theoretically.
-
Key words:
- three-dimension braided /
- composites /
- structural model /
- geometrical characteristics
-
[1] 卢子兴,杨振宇,李仲平. 三维编织复合材料力学行为研究进展[J] 复合材料学报,2004,21(2):1~7 Lu Zixing,Yang Zhenyu, Li Zhongping. Development of investigation into mechanical behavior of three dimensional braided composites [J] Acta Mater Comp Sinica, 2004,21(2):1~7(in Chinese) [2] Du Guangwu,Ko Frank K. Unit cell geometry of 3-D braided structures[J] Journal of Reinforced Plastics and Composites, 1993, 12(7):752~768 [3] Soheil Mohajerjashi. More on the fiber architecture of 3-D braided composites. AIAA-97-1404,1997 [4] Pandey R, Hahn H T. Visualization of representative volume elements for three-dimensional four-step braided composites[J] Composites Science and Technology, 1996, 56:161~170 [5] 吴德隆,郝照平. 五向编织结构复合材料的分析模型[J] 宇航学报,1993,3:13~16 Wu Delong, Hao Zhaoping. Analysis model of 5-directional braided composites [J] Chinese J of Astronautics, 1993, 3:13~16(in Chinese) [6] 庞宝君,杜善义,韩杰才. 三维四向编织复合材料细观组织及分析模型. 复合材料学报,1999,16(3):135~139 Pang Baojun, Du shanyi, Han Jiecai. Meso-structure and modeling of three-dimensional multi-directional composites [J] Acta Mater Comp Sinica, 1999, 16(3):135~139(in Chinese) [7] 韩其睿,李嘉禄,李学明. 复合材料三维编织结构的单元体模型[J] 复合材料学报,1996,13(3):76~80 Han Qirui, Li Jialu, Li Xueming. Unit cell geometry of 3-D braided structure of composites [J] cta Mater Comp Sinica, 1996, 13(3):76~80(in Chinese) [8] 刘振国,陆 萌,麦汉超, 等. 三维四向编织复合材料弹性模量数值预报. 北京航空航天大学学报,2000, 26(2):182~185 Liu Zhenguo, Lu Meng, Mai Hanchao, et al. Numerical Prediction of moduli of 3-D and 4 step braided composites [J] Journal of Beijing University of Aeronautics and Astronautics, 2000, 26(2):182~185(in Chinese) [9] 李嘉禄,刘 谦. 三维编织复合材料中纤维束横截面形状的研究[J] 复合材料学报,2001,18(2):9~13 Li Jialu, Liu Qian. Study on fiber tows’ cross-section in 3-D braided composites [J] Acta Mater Comp Sinica, 2001, 18(2):9~13(in Chinese) [10] 吴德隆,沈怀荣. 纺织结构复合材料的力学性能[M] 长沙:国防科技大学出版社, 1998 Wu Delong, Shen Huairong. Mechanical behavior of textile structural composites. Changsha:National University of Defence Technology Press, 1998(in Chinese)
点击查看大图
计量
- 文章访问数: 3332
- HTML全文浏览量: 247
- PDF下载量: 26
- 被引次数: 0