Design of the flute grinding parameters to be produced with parallel grinding machine
-
摘要: 螺旋槽的加工是回转体刀具加工的重要组成部分,其形状参数(尤其是前角、槽深和槽宽)对刀具的切削过程有很大的影响.基于6-UPS并联机床,在分析并联机床加工工艺特性的基础上,按照螺旋槽加工中砂轮与刀具的相对运动关系,建立了螺旋槽加工运动的理论模型,对可能影响螺旋槽成形的因素进行了全面分析.进而建立了一个仿真模型,可以对所有的磨削参数进行快速的定量设计和优化,主要包括砂轮偏转角度、砂轮厚度、砂轮轴向平移位置和螺旋槽深度,并通过加工实验进行了验证.Abstract: The flute machining is important to produce a milling cutter. The geometric parameters (especial its rake angle,flute depth and flute width) have essential influence on the performance of the tool. Using a 6-UPS parallel machine,based on analyzing its special machining and structure features,general analysis was given for all factors which will influence of flute forming,and according to the motion relation between grinding wheel and the milling cutter,a simulation model system was established,that can optimize and quantitative design all of the parameters quickly. These parameters include the grinding wheel deflexion,the grinding wheel thickness,the grinding wheel offset position along the axes direction,and the flute depth. These parameters have been verified by experiments.
-
Key words:
- mechanical engineering /
- cutting tools /
- grinding /
- parallel machine /
- flute
-
[1] 石 琳,吴道全. 球头立铣刀周齿螺旋面的刃磨[J].贵州工学院学报,1997,26(1):74~82 Shi Lin, Wu Daoquan. The grinding of the ball-nose end mill’s peripheral tooth helix surface[J]. Journal of Guizhou Institute of Technology,1997,26(1):74~82 (in Chinese) [2] 刘井玉. 特种回转面刀具几何建模及数控磨削加工原理研究 . 哈尔滨:哈尔滨工业大学机械工程及自动化学院,1998 Liu Jingyu. Calibration, platform detection and control of a parallel tool grinding . Harbin:School of Mechanical Engineering and Automation, Harbin Institute of Technology, 1998(in Chinese) [3] 高佑方.刀具的切削刃结构和立铣刀的数学模型研究[J]. 株洲工学院学报,2001,15(3):54~57 Gao Youfang. Research of mathematical models about the structure of cutting edge of cutting tool sand vertical milling cutter[J]. Journal of Zhuzhou University of Technology, 2001,15(3):54~57 (in Chinese) [4] 吕彦明.刀具数控刃磨技术研究 .北京:北京航空航天大学机械工程及自动化学院,1999 Lü Yanming. Study on CNC grinding of cutting tools . Beijing:School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, 1999(in Chinese) [5] Pei B Q,Li W,Chen W Y,et al. Nc post processing for conventional machines and parallel kinematic machines . In:Chen Dingchang, ed. 6th International Conference on Progress of Machining Technology . Beijing, 2002.860~864
点击查看大图
计量
- 文章访问数: 3118
- HTML全文浏览量: 299
- PDF下载量: 994
- 被引次数: 0