Geometrical Problems Involved in Radiation-Calculation of Heteromorphosis Cavity
-
摘要: 讨论了解决异型封闭腔辐射几何学问题的几种方法:异型封闭腔内,表面间可见性的判断方法;优化异型封闭腔角系数计算的方法;确定异型封闭腔内定向辐射的壁面辐射源的方法.计算了两种结构喷管封闭腔内的角系数,并从角系数的互换性和完整性定理验证了方法的正确性和有效性,为异型封闭腔的辐射计算解决了几何问题.Abstract: To calculate numerically the radiation of a enclosure within a heteromorphosis cavity, attention was focused on: how to decide the visibility between two surfaces, how to improve the old method of configuration factor computation, how to approximately and efficiently decide the radiation resource of directional, spectral radiation in cavity. As an example, configuration factors in two type of nozzles were calculated and tested to verify the rationality and validity of the method.
-
Key words:
- heteromorphosis /
- geometric parameters /
- cavities /
- radiation
-
[1] 西格尔 R, 豪厄尔 J R, 热辐射传热[M].曹玉璋等译.北京:科学出版社,1990. [2]Cheng H, Hong X, Lu W. Numerical simulation on angle factor of outward radiation for four diagonally-arranged nozzles[J]. Journal of Propulsion Technology, 1999, 20(104):69~72. [3]Stroom J C, DeBoer H C J. Inclusion of geometrical uncertainties in radiotherapy treatment planning by means of coverage probability[J]. International Journal of Radiation Oncology Biology Physics, 1999, 43(4):905~920. [4]张小英.飞机发动机排气系统红外辐射特性计算研究 .北京:北京航空航天大学动力系,1999. -
点击查看大图
计量
- 文章访问数: 2530
- HTML全文浏览量: 247
- PDF下载量: 1053
- 被引次数: 0
下载:
