Experimental Investigation on High-Loading Transonic Compressor Rotor
-
摘要: 利用高频响动态压力传感器对一个具有22级压比的跨音压气机级(ATS-2)进行了转子叶尖间隙流场测试研究,获得了多个转速不同节流状态下的转子叶尖内壁面静压场结果表明,100%转速时,除前缘贴体斜激波外,叶片通道内存在一道二次正激波,并在吸力面附近出现了一道较短的正激波该波系随出口节流加深而向上游移动,并最终归并为前缘正激波,此时,级性能达到峰值效率另外,比较了不同叶尖间隙机匣的总性能,结果表明,机匣结构和间隙的变化严重影响压气机级性能参数Abstract: Unsteady pressure transducers with high frequency response were used to investigate tip clearance flows in a transonic compressor rotor (ATS-2), which is a high-loading compressor with 2.2 designed pressure ratio. Static pressure contours were obtained for different operating conditions at several different speeds. It was followed that, not only an attached oblique shock emanating from the leading edge and a secondary normal shock exist in the passage at 100% speed, but also a short-range normal shock appears near the suction surface. Withclosing the outlet throttle, the shock waves move forward and finally merge into normal shock near the leading edge, meanwhile, the stage performance reaches the peak efficiency. The overall performances of ATS-2 with two different tip clearance casings were compared. It reveals that the change of casing structure and tip clearance seriously influence the performance of the compressor.
-
Key words:
- transonic compressors /
- leakage /
- shock wave structure
-
[1] Moore R D. Rotor tip clearance effects on overall and blade-element performance of axial-flow transonic fan stage. NASA TP-2049,1982. [2]Wisler D C. Loss reduction in axial-flow compressors through low-speed model testing[J]. ASME J of Turbomachinery, 1985, 107:354~363. [3]Adamczyk J J, Celestina M L, Greitzer E M. The role of tip clearance in high-speed fan stall[J]. Transactions of the ASME, Journal of Turbomachinery, 1993,115:28~39. [4]桂幸民,王同庆,于 清,等. 跨音压气机转子叶尖流场试验与分析[J]. 工程热物理学报, 1998,19(5):553~558. [5]桂幸民,聂超群,王同庆,等. 跨音压气机转子叶尖流场复杂流动观测[J]. 工程热物理学报, 2000,21(5):570~572. [6]Sellin M D, Puterbaugh S L, Copenhaver W W. Tip shock structures in transonic compressor rotors. AIAA 93-1869,1993. [7]Copenhaver W W, Mayhew E R, Hah C, et al. The effect of tip clearance on a swept transonic compressor rotor[J]. Transactions of the ASME, Journal of Turbomachinery, 1996, 118:230~239. [8]桂幸民,聂超群,王同庆,等. 跨音压气机转子叶尖复杂流动测试研究. 北航科学研究报告BH-B4937,1997. [9]Prince Jr D C. 3D shock structures for transonic/supersonic compressor rotors[J]. Journal of Aircraft, 1980, 17(1):28~37. [10] Maerz J, Gui X, Neise W. On the structure of rotating instabilities in axial flow machines. AIAA SL-047/GER-35, 1999. -
点击查看大图
计量
- 文章访问数: 3434
- HTML全文浏览量: 176
- PDF下载量: 803
- 被引次数: 0
下载:
