Study on Evaluation of Localized Corrosion of 2024T3 Aluminum Alloy with EIS
-
摘要: 通过周期浸泡腐蚀实验和时域法电化学阻抗谱(EIS)技术研究了LY12CZ铝合金的腐蚀损伤,用金相法测量最大腐蚀深度,用统计分析方法处理实验数据.结果表明,LY12铝合金经周期浸泡腐蚀试验后,低频阻抗倒数1/Rd符合Gumbel分布,1/Rd随腐蚀时间变化的动力学曲线呈S形,该曲线分成点蚀和剥蚀两个阶段,点蚀阶段符合Sigmoidal曲线关系,剥蚀阶段符合线性关系.1/Rd与最大腐蚀深度在空间统计分布和腐蚀动力学规律两个方面都有一致性,因此可以用1/Rd表征腐蚀损伤程度.由此可见,时域法EIS技术可作为一种快速、无损、定量的腐蚀评估手段.
-
关键词:
- 铝合金 /
- 腐蚀评定 /
- 局部腐蚀试验 /
- 电化学阻抗法(EIS)
Abstract: Alternating immersion test was applied to 2024T3 Al alloy. Electrochemistry Impedance Spectroscopy (EIS) by time domain method was performed on the specimens. Statistic method was also used to deal with data because localized corrosion is a stochastic phenomenon. The results show that the reciprocal of low frequency impedance (1/Rd) was consistent with the Gumbel distribution law. The dynamic variation curve of 1/Rd vs. test period was somewhat of S shape which must be divided into two stages to treat the data, i.e. pitting and intergranular corrosion (Sigmoidal curve) and exfoliation (linear line). Compared with the maximum corrosion depth data (dm) measured by optical microscope, it can be concluded that 1/Rd and dm have similar statistical distribution and time-dependent growth. Quantitative relation between the 1/Rd and dm has been established. According to the relation, EIS by time domain method can enable a nondestructive, quantitative and quick evaluation for localized corrosion of 2024 Al alloy. -
[1] Dacres C M,Daivis G D,Krebs L A,et al. The use of electrochemistry and ellipsometry for identifying and evaluating corrosion on aircraft. AFOSR-TR-97/AF-A329519,1997. [2] Conde A, De Damborenea J. An electrochemical impedance study of a natural aged Al-Cu-Mg alloy in NaCl[J]. Corrosion Science, 1997, 39(2):295~303. [3] 宋诗哲.腐蚀电化学研究方法[M].北京:化学工业出版社,1994. [4] 胡艳玲. LY12铝合金的腐蚀评估与寿命预测方法研究. 北京:北京航空航天大学材料科学与工程系,1999. [5] 刘永辉,张佩芬.金属腐蚀学原理[M].北京:航空工业出版社,1993. [6] Sammells A F, Bowers J S. Electrochemical impedance pattern recognition for detection of hidden chemical corrosion on aircraft components. AFOSR-94-0608TR/AD-A284998,1994. [7] 张九渊,洪明庚,卢建树,等.孔蚀统计规律的对比研究[J].中国腐蚀与防护学报,1994,14(2):161~167. [8] 贺国芳.可靠性数据的收集与分析[M].北京:国防工业出版社,1991.25~41.
点击查看大图
计量
- 文章访问数: 4866
- HTML全文浏览量: 117
- PDF下载量: 11
- 被引次数: 0