基于新息正交的工业CT图像自适应缺陷识别

左凯; 孙同景; 李振华; 陶亮

基于新息正交的工业CT图像自适应缺陷识别

山东大学控制科学与工程学院, 济南 250061

基金项目: 国防科工委基础科研基金资助项目(B142008.0209-08)

详细信息

中图分类号: TP 391.4
计量
- 文章访问数: 4580
- HTML全文浏览量: 214
- PDF下载量: 1077
- 被引次数: 0
出版历程
- 收稿日期: 2010-03-12
- 网络出版日期: 2010-09-30

Adaptive industrial CT outlier detection and accommodation using innovation orthogonal

School of Control Science and Engineering, Shandong University, Jinan 250061, China

摘要

摘要: 针对X射线投影图像的特点,研究基于Kalman滤波算法新息正交原理的缺陷识别问题.建立了投影图像的二维状态空间模型,定义了确定图像区域大小与灰度的动态评价函数和相应的阈值.在分析Kalman滤波算法新息正交性的基础上,得到了一种新的缺陷判别方法,提出了图像数据自适应补偿算法,提高了图像的识别效率和精度,并通过实验验证了方法的有效性.
- 工业 /
- 计算机断层成像 /
- 卡尔曼滤波 /
- 新息 /
- 正交性 /
- 图像识别
Abstract: The problem of defect recognition in industrial CT(computerized tomography) projection image was discussed based on the innovation orthogonality principle. Projection image was modeling in a 2-D state space structure. By analyzing the innovation orthogonality of Kalman filtering algorithm, a dynamic evaluation function and the corresponding threshold on the determination of image region and grey scale were defined respectively. A new adaptive defect recognition method was obtained. Based on 2-D Kalman filter, the proposed method was implemented for defecting image recognition adaptively which can improve the efficiency and accuracy for CT image recognition. An experiment was given to illustrate the effectiveness of the proposed method.
- industrial /
- computerized tomography /
- Kalman filtering /
- innovation /
- orthogonal /
- image recognition

HTML全文

参考文献(1)

[1] Cios K J,Shin I.Image recognition neural network[J].Neurocomputing,1995,7(2):159-185 [2] 李弼程,彭天强,彭波.智能图像处理技术[M].北京:电子工业出版社,2004 Li Bicheng,Peng Tianqiang,Peng Bo.Intelligent image processing technology[M].Beijing:Electronics Industry Press,2004(in Chinese) [3] 王琪,万中南,韩俊伟.基于图像中心矩和特征向量的目标识别方法[J].激光与红外,2009,39(8):895-898 Wang Qi,Wan Zhongnan,Han Junwei.Novel method of target recognition based on changeless rules and image feature vector[J].Laser & Infrared,2009,39(8):895-898(in Chinese) [4] Yeom S,Javidi B,Roh Y J,et al.Three-dimensional object recognition using x-ray imaging[J].Optical Engineering,2008,44(2):1-23 [5] Alaknanda,Anand R S,Kumar P.Flaw detection in radiographic weldment images using morphological watershed segmentation technique[J].NDT and E International,2009,42(1):2-8 [6] Liao T W.Fuzzy reasoning based automatic inspection of radiographic welds:weld recognition[J].Journal of Intelligent Manufacturing,2004,15(1):69-85 [7] 张晓光,林家骏.X射线检测焊缝的图像处理与缺陷识别[J].华东理工大学学报:自然科学版,2004,30(2):199-202 Zhang Xiaoguang,Lin Jiajun.Research of image processing and defect recognition for industrial radiographic weld inspection[J].Journal of East China University of Science and Technology:Natural Science,2004,30(2):199-202(in Chinese) [8] 高向东,丁度坤,赵传敏.用于焊缝位置识别的视觉模型设计与试验[J].机械工程学报,2009,45(4):136-141 Gao Xiangdong,Ding Dukun,Zhao Chuanmin.Design and experiment of visual model for detecting weld position[J].Journal of Mechanical Engineering,2009,45(4):136-141(in Chinese) [9] Woods J.Two-dimensional Kalman filtering[M].Brelin:Springer Berlin/Heidelberg,1981:155-205 [10] Kaufman H,Woods J.Estimation and identification of two-dimensional images[J].IEEE Transactions on Automatic Control,1983,28(7):745-756 [11] 庄天戈.CT原理与算法[M].上海:上海交通大学出版社,1992 Zhuang Tiange.CT theory and algorithm[M].Shanghai:Shanghai Jiao Tong University Press,1992(in Chinese)

施引文献

资源附件(0)

访问统计